Although DNREC has indicated they can update our survey of driveway culverts and assist us with planning an improved system,
they have a sufficient backlog that they cannot start until this winter.
| location |
1 |
3 |
5 |
7 |
9w |
9e |
11w |
11e |
13 |
15 |
17 |
19 |
21 |
| diameter |
12 |
12 |
12 |
12 |
|
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
| length |
21 |
21 |
21 |
21 |
|
21 |
21 |
13 |
21 |
21 |
21 |
21 |
21 |
| material |
Metal |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
| misc |
|
|
|
brush |
brush |
brush |
|
|
|
|
|
|
|
| west end |
150 |
305 |
395 |
515 |
|
675 |
760 |
875 |
990 |
1060 |
1325 |
1440 |
1660 |
| west bot |
3.4 |
3.6 |
3.5 |
3.2 |
|
3.8 |
3.7 |
4.5 |
3.4 |
4 |
4 |
5.4 |
6.1 |
| east bot |
3.5 |
3.7 |
3.4 |
3.4 |
|
3.6 |
4.2 |
4.6 |
3.6 |
4.2 |
3.8 |
5.5 |
5.9 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| location |
2 |
4 |
6 |
8 |
10 |
12 |
14 |
16 |
18 |
18a |
20 |
|
|
| diameter |
|
|
|
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
|
|
| length |
|
|
|
21 |
21 |
21 |
21 |
100 |
21 |
18 |
100 |
|
|
| mat'l |
|
Metal |
Metal |
Conc |
Conc |
Conc |
Conc |
Conc |
Conc |
Metal |
Conc |
|
|
| misc |
|
|
ivy |
rocks, brush |
|
|
reeds |
ditch buried |
visib. sewer |
ivy, brush |
ditch buried |
|
|
| west end |
|
|
390 |
520 |
710 |
810 |
990 |
1190 |
1320 |
1370 |
1430 |
|
|
| west bot |
|
|
|
2.3 |
2.2 |
2.7 |
2.3 |
|
2.4 |
3.4 |
|
|
|
| east bot |
|
|
|
2.2 |
2.2 |
2.6 |
2.2 |
|
3 |
2.6 |
|
|
|
Location=street address (usually); culvert diameter in inches; length in feet; west bot/east bot are elevations of bottom of designated culvert end; west end is distance along the appropriate ditch of the west ("downstream") end of the culvert.
Note that the zero points (lengthwise) of most ditches is the center of the ditch along the east side of DE361. The zero points for the Bridge Rd south, Addy Rd north and Evergreen ditches are the west end of the respective culverts under Pine Rd; the zero point of the Addy Rd south ditch is its intersection with the Evergreen ditch (roughly 300' south of Addy Rd); the zero point of the Bridge Rd north ditch is the south end of the culvert under Bridge Rd.
Data is from a 1992 Delaware Soil and Conservation survey (locating ditch heights and conduit locations), which was done relative to an arbitrary elevation.
2000 Artesian Water survey has elevations of all main culverts under roads-measured relative to Mean Lower Low Sea Level-the standard the USGS uses, and was used to convert the relative elevations to absolute.
Tides at Jefferson Creek generally range between 0.5 and 1.5 feet above MLLSL; see this USGS site for specifics.
|
